Lead with the conclusion: when an EN71 report fails, first determine whether it is a "physical" or "chemical" issue. When listing toys in the Amazon European store (including products used by children under 12), the platform requires an EN71 (EU toy safety standard, specifying physical and mechanical properties, flammability, and chemical migration limits for toys) test report. Failed reports usually fall into three categories: physical and mechanical properties (EN71-1), flammability (EN71-2), and chemical migration (EN71-3). The rectification paths are completely different: **physical problems require mold or structural changes, chemical problems require material or process changes**. According to public industry data (reference range), the full EN71 test cycle is 7–15 working days, with a cost of 1,000–12,000 yuan. Retesting after failure usually takes 5–10 working days, with costs charged per individual item, about 800–3,000 yuan. ## Breakdown of high-frequency failure items | Failure category | Typical items | Common causes | Rectification direction | | --- | --- | --- | --- | | EN71-1 Physical and mechanical | Small parts, sharp edges, cord length | Detachable small components in toys for children under 3 | Change molds, add fastening, add warnings | | EN71-2 Flammability | Burning rate exceeds the limit | Insufficient flame retardancy of fabrics or fillings | Replace with flame-retardant fabrics or adjust the process | | EN71-3 Chemical migration | Lead, cadmium, phthalate migration exceeds limits | Non-compliant inks, plastics, coating raw materials | Change ink/plastic suppliers and provide MSDS | **Note**: The limits for EN71-3 are subject to the latest harmonized standard. The lead migration limit has been tightened to 2.0 mg/kg (dry, powdery, or brittle toy materials). The official text shall prevail. ## Five-step rectification method **Step 1: Identify the failed items**. Ask the laboratory to clearly mark the specific failed components, test methods, and measured values in the report. Many sellers only receive a "failed" conclusion without details, resulting in blind rectification. **Step 2: Supply chain traceability**. Chemical failures must be traced back to specific materials (inks, plastic pellets, coatings, textile dyes), and suppliers must be asked to provide the latest MSDS (Material Safety Data Sheet, explaining material composition and hazard information) and declarations of conformity. **Step 3: Engineering changes and sample confirmation**. Physical failures require mold or structural changes. After the changes, conduct an internal pre-check first (such as a self-check with a small parts test cylinder), and then submit samples for retesting. **Step 4: Choose the retest scope**. If only a single item fails, only that item may be retested, but Amazon may require a full-item report. It is recommended to confirm the acceptable report scope with platform customer service to avoid duplicate testing. **Step 5: Match reports with certificates**. The EN71 report must be issued by a partner laboratory with CNAS/CMA qualifications, and must be accompanied by a DoC (Declaration of Conformity, the manufacturer's self-declaration that the product complies with the EU Toy Safety Directive 2009/48/EC). Shuwang Testing and Certification Platform can coordinate with partner laboratories to complete. Leave your email and an engineer will send a written evaluation within one business day.
Export certification solutions provider; we do not perform testing activities and are not a certification body. The testing described on this page is carried out by partner laboratories holding CNAS/CMA or equivalent qualifications, and certificates are issued by EU Notified Bodies (NB) or bodies authorised by the standards authority of the destination country. The lead times and costs on this page are public industry reference ranges; actual figures are subject to engineer assessment and body scheduling. ## One-sentence conclusion If EN71 fails, first determine whether it is a physical or chemical issue: for physical issues, change the structure; for chemical issues, change the materials. Before retesting, be sure to confirm the scope of reports accepted by Amazon to avoid full-item retesting and increased costs. Send your email here and we will reply with the scheme, timeline and cost range.